H2020 SOLiDIFY consortium produces prototype solid-state lithium battery - Charged EVs

By Nicole Willing

H2020 SOLiDIFY consortium produces prototype solid-state lithium battery - Charged EVs

The H2020 SOLiDIFY consortium, coordinated by Belgian research organization Imec, has developed a lithium-metal solid-state battery with high energy density.

The prototype battery pouch cell, manufactured by Imec in the assembly lab at EnergyVille, Belgium, has a "liquid-to-solid" processed solid electrolyte, which was jointly developed by Imec and its 13 consortium partners. The cell has an energy density of 1,070 Wh/L, which is above the maximum of 800 Wh/L for lithium-ion technologies, according to Imec.

The manufacturing process is manageable at room temperature, adaptable to current lithium-ion battery production lines and projected to cost less than €150 ($166) per kWh.

For the prototype's solid electrolyte, a doped polymerized ionic liquid (PIL)-based nanocomposite material was used, enabling the liquid solidification approach. Combining a high-capacity composite cathode separated from a thin lithium metal anode by a thin solid electrolyte separator (50 μm) resulted in high energy density and a compact battery cell stack.

The cell's charge rate increased to 3 hours and its lifetime to 100 cycles, overcoming mechanical strength and cathode impregnation challenges. The thermally stable solid cell had lower flammability than liquid electrolytes. The application of nanometer-thin protective coatings enabled the use of cobalt-lean cathodes.

The SOLiDIFY consortium comprises 14 partners: research centers imec/EnergyVille, Fraunhofer, Centro Richerche Fiat SCPA, Empa, Hasselt University/EnergyVille and Delft University of Technology, as well as industry partners VDL Groep, Umicore, Solith, SOLVIONIC, Sidrabe, Leclanché, Gemmate Technologies and Powall.

The project ended in June 2024 but as a next step, the partners will further upscale the battery technology. Imec aims to continue increasing the energy and power density of energy storage technologies and research next-generation cathode materials and lithium-metal anodes using electroplating.

Source: Imec

Share on Facebook Share Share on TwitterTweet Share on Pinterest Share Share on LinkedIn Share Send email Mail

Previous articleNext article

POPULAR CATEGORY

corporate

10891

tech

11464

entertainment

13373

research

6115

misc

14247

wellness

10854

athletics

14235